NFS4 + Kerberos with AD

Tue May 20 09:20:32 EDT 2008

Does running ldconfig make any difference?

On Tue, May 20, 2008 at 9:03 AM, Grover, Justin N.
<Justin.Grover at ic.fbi.gov> wrote:
> After installing librpcsecgss1, the ldd output did not change.
>
> I do, however, have an /etc/gssapi_mech.conf file.  It has one line in it:
> /usr/lib/libgssapi_krb5.so.2    mechglue_internal_krb5_init
>
>
> And Trond, I did use Mike Eisler's blog to help me originally set up the keytabs, thanks.  I found it to be very helpful, though his server software is a little different.
>
> ________________________________________
> From: kwcoffman at gmail.com [kwcoffman at gmail.com] On Behalf Of Kevin Coffman [kwc at citi.umich.edu]
> Sent: Tuesday, May 20, 2008 8:55 AM
> To: Grover, Justin N.
> Cc: nfsv4 at linux-nfs.org
> Subject: Re: NFS4 + Kerberos with AD
>
> Justin,
> After installing librpcsecgss1, does the ldd output for svcgssd
> change?  librpcsecgss should have a dependency on our libgssapi (or
> libgssglue, depending on the version).  I'm pretty sure if it is
> trying to use the Kerberos libgssapi library directly things will not
> work.
>
> Also, what does your /etc/gssapi_mech.conf file look like?  (If you
> don't have one, you likely aren't using our libgssapi/libgssglue.)
>
> K.C.
>
> On Mon, May 19, 2008 at 1:39 PM, Grover, Justin N.
> <Justin.Grover at ic.fbi.gov> wrote:
>> I found and installed the package librpcsecgss1, but again, nothing changed.
>>
>> According to the server error, it's saying that the token that it receives from the client is malformed, and that just boggles my mind.  It's not like we're trying to do anything too fancy.  Oh well... :\
>>
>>
>> ________________________________________
>> From: kwcoffman at gmail.com [kwcoffman at gmail.com] On Behalf Of Kevin Coffman [kwc at citi.umich.edu]
>> Sent: Thursday, May 15, 2008 11:18 AM
>> To: Grover, Justin N.
>> Cc: J. Bruce Fields; nfsv4
>> Subject: Re: NFS4 + Kerberos with AD
>>
>> I see that librpcsecgss and libgssglue are not referenced here.
>>
>> I think this needs to be taken up with the distro maintainers?
>>
>> On Thu, May 15, 2008 at 9:27 AM, Grover, Justin N.
>> <Justin.Grover at ic.fbi.gov> wrote:
>>> Oh, and for 'ldd /usr/sbin/rpc.svcgssd', the following is listed:
>>>
>>> linux-gate.so.1 =>
>>> libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2
>>> libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2
>>> libkrb5.so.3 => /usr/lib/libkrb5.so.3
>>> libk5crypto.so.3 => /usr/lib/libk5crypto.so.3
>>> libkrb5support.so.0 => /usr/lib/libkrb5support.so.0
>>> libcom_err.so.2 => /lib/libc.so.6
>>> libresolv.so.2 => /lib/tls/i686/cmov/libresolv.so.2
>>> libnfsidmap.so.0 => /usr/lib/libnfsidmap.so.0
>>> libc.so.6 => /lib/tls/i686/cmov/libc.so.6
>>> /lib/ld-linux.so.2
>>> libldap.so.2 => /usr/lib/libldap.so.2
>>> liblber.so.2 => /usr/lib/liblber.so.2
>>> libcrypt.so.1 => /lib/tls/i686/cmov/libcrypt.so.1
>>> libsasl2.so.2 => /usr/lib/libsasl2
>>> libgnutls.so.12 => /usr/lib/libgnutls.so.12
>>> libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0
>>> libtasn1.so.2 => /usr/lib/libtasn1.so.2
>>> libz.so.1 => /usr/lib/libz.so.1
>>> libgcrypt.so.11 => /usr/lib/libgcrypt.so.11
>>> libgpg-error.so.0 => /usr/lib/libgpg-error.so.0
>>> libnsl.so.1 => /lib/tls/i686/cmov/libnsl.so.1
>>>
>>> ________________________________________
>>> From: kwcoffman at gmail.com [kwcoffman at gmail.com] On Behalf Of Kevin Coffman [kwc at citi.umich.edu]
>>> Sent: Wednesday, May 14, 2008 4:27 PM
>>> To: Grover, Justin N.
>>> Cc: J. Bruce Fields; nfsv4
>>> Subject: Re: NFS4 + Kerberos with AD
>>>
>>> Thanks Justin,
>>> I assume from your email address that is as much as you can share.  It
>>> appears that the size of the packet from the nfsclient to nfsserver is
>>> reasonable for a GSS token.  I'm assuming something is getting mixed
>>> up while sending that token up from the kernel to svcgssd.
>>>
>>> Back to the basics.  For the client and server machines:
>>>
>>> What kernel version and nfs-utils versions do you have?
>>> What Kerberos implementaion and version?
>>> What does "ldd /usr/sbin/rpc.svcgssd" on the server machine show?
>>>
>>> K.C.
>>>
>>> On Wed, May 14, 2008 at 3:46 PM, Grover, Justin N.
>>> <Justin.Grover at ic.fbi.gov> wrote:
>>>> I am now using DES-CBC-CRC, and still running into the same issue.  Figures... :-p
>>>>
>>>> I also did a packet trace using tcpdump, and will provide packet header information below (note MAC addresses / IPs are not actual):
>>>>
>>>> FROM nfsclient TO ActiveDirectory:
>>>> 15:05:00 00:11:22:aa:bb:cc, ethertype IPv4 (0x0800), length 1404: (tos 0x0, ttl 64, id 33187, offset 0, flags [DF], proto UDP (17), length 1390) 192.168.1.30.32782 > 192.168.1.200.88: [bad udp cksum c54e!]
>>>>
>>>> FROM ActiveDirectory TO nfsclient:
>>>> 15:05:00 00:11:22:66:77:ee > 00:11:22:aa:bb:cc, ethertype IPv4 (0x0800), length 1384: (tos 0x0, ttl 128, id 8296, offset 0, flags [none], proto UDP (17), length 1370) 192.168.1.200.88 > 192.168.1.30.32782: [udp sum ok]
>>>>
>>>> FROM nfsclient TO nfsserver:
>>>> 15:05:00 00:11:22:aa:bb:cc > 00:22:33:aa:cc:dd , ethertype IPv4 (0x0800), length 1418: (tos: 0x0, ttl 64, id 26804, offset 0, flags [DF], proto TCP (6), length 1404) 192.168.1.30.1193293888 > 192.168.1.100.2049: 1352 null
>>>>
>>>> FROM nfsserver TO nfsclient:
>>>> 15:05:00 00:22:33:aa:cc:dd, ethertype IPv4 (0x0800), length 74: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 60) 192.168.1.100.2049 > 192.168.1.30.0: reply ERR 0: RPC Version mismatch (167772160-0)
>>>>
>>>>
>>>> ________________________________________
>>>> From: kwcoffman at gmail.com [kwcoffman at gmail.com] On Behalf Of Kevin Coffman [kwc at citi.umich.edu]
>>>> Sent: Wednesday, May 14, 2008 9:42 AM
>>>> To: Grover, Justin N.
>>>> Cc: J. Bruce Fields; nfsv4
>>>> Subject: Re: NFS4 + Kerberos with AD
>>>>
>>>> On Tue, May 13, 2008 at 6:42 PM, J. Bruce Fields <bfields at fieldses.org> wrote:
>>>>> On Tue, May 13, 2008 at 05:35:32PM -0400, Grover, Justin N. wrote:
>>>>>  > I will try creating the keytabs with des-cbc-crc and report back with findings when I can...
>>>>>  >
>>>>>  > Also Kevin, is there a way to specify the svcgssd service to startup last in
>>>>>  > the nfs-kernel-server startup?  With the -vvvf option, when I do an
>>>>>  > /etc/init.d/nfs-kernel-server restart, the process hangs in the foreground
>>>>>  > when svcgssd starts (making it so mountd doesn't get started).
>>>>>  >
>>>>>
>>>>>  Just drop the "f" and it'll put itself in the background and log the
>>>>>  results as usual.
>>>>>
>>>>>  Or you can just kill the rpc.svcgssd that the init scripts started and
>>>>>  run your own with -vvvf and watch the output in the terminal.
>>>>
>>>> Yes, this is what I intended.  However, after looking at the code
>>>> again, newer versions of svcgssd will only log the token data when
>>>> running in the foreground in a terminal *and* when compiled with DEBUG
>>>> defined.
>>>>
>>>> Therefore, a packet trace showing the token being sent from the client
>>>> would be most helpful...
>>>>
>>>>
>>>
>>>
>>
>>
>
>